FPC_Interface_Introduction

This chapter mainly introduces the wiring methods of several FPC connectors used on the KICKPI development board.

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Flip - down FPC Interface

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

At the cable connection: The blue support plate faces upwards, and the white metal surface faces downwards. Then insert it into the FPC interface.

image-20250421112237616

image-20250421112308072

Pull - out Upward FPC Interface

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

Note: For all peripherals using FPC interfaces, the motherboard must be powered off before disconnecting/connecting the cables!!!

At the cable connection: The white metal surface faces upwards, and the blue support plate faces downwards. Then insert it into the FPC interface.

image-20250421112535444

image-20250421112559949