USB_Cable_Flashing

The path of the burning tool network disk:

5-DevelopmentTool\USB_ImageBurnTool\PhoenixSuit.zip

Install USB Driver

Extract PhoenixSuit.zip The USB driver directory:

PhoenixSuit/Drivers/AW_Driver/ 

The driver cannot be installed directly. It requires recognizing an "Unknown Device" in Device Manager first.

Open Device Manager on PC If the board enters burning mode successfully and the PC lacks the USB driver, an "Unknown device" will appear. Follow the steps below to install the driver:

image-20250219155858913

image-20250219155942874

image-20250219160431151

image-20250219160504707

---

Common Issues

1. Compatibility Error

Refer to Microsoft’s official solution: A driver can't load on this device - Microsoft Support

---

Install Image Burning Tool

Extract PhoenixSuit.zip

Open PhoenixSuit.exe

Burning Tool Interface

---

Burn the Image

Select Image

1. Enter the "Firmware" interface.

2. Click on "Image" to select the image.

   

   image-20250219160640908

Start Burning

Reconnect the motherboard in burning mode, and the tool will prompt to start burning.

1. Click Yes to begin.

2. Wait for the progress bar to complete.

3. The board will reboot automatically after burning.

The board will automatically reboot after successful burning.