# USB\_Cable\_Flashing

The path of the burning tool network disk:

```
5-DevelopmentTool\USB_ImageBurnTool\PhoenixSuit.zip
```

### Install USB Driver

**Extract PhoenixSuit.zip**\
The USB driver directory:

```
PhoenixSuit/Drivers/AW_Driver/ 
```

> The driver cannot be installed directly. It requires recognizing an "Unknown Device" in Device Manager first.

**Open Device Manager on PC**\
If the board enters burning mode successfully and the PC lacks the USB driver, an "Unknown device" will appear. Follow the steps below to install the driver:

![image-20250219155858913](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219155858913.png)

![image-20250219155942874](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219155942874.png)

![image-20250219160431151](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219160431151.png)

![image-20250219160504707](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219160504707.png)

***

### Common Issues

1. **Compatibility Error**

Refer to Microsoft’s official solution:\
[A driver can't load on this device - Microsoft Support](https://support.microsoft.com/en-us/windows/a-driver-can-t-load-on-this-device-8eea34e5-ff4b-16ec-870d-61a4a43b3dd5)

***

### Install Image Burning Tool

**Extract PhoenixSuit.zip**

**Open PhoenixSuit.exe**\
![image-20250513163349688](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250513163349688.png)

**Burning Tool Interface**\
![image-20250219160538270](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219160538270.png)

***

### Burn the Image

**Select Image**

1. Enter the "Firmware" interface.
2. Click on "Image" to select the image.

   ![image-20250219160640908](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219160640908.png)

**Start Burning**

Reconnect the motherboard in burning mode, and the tool will prompt to start burning.

1. Click **Yes** to begin.
2. Wait for the progress bar to complete.
3. The board will reboot automatically after burning.\
   ![image-20250219160856586](http://tanzhtanzh.oss-cn-shenzhen.aliyuncs.com/img/image-20250219160856586.png)

The board will automatically reboot after successful burning.
